D210 Series

OpenVox D210 Series takes full advantage of Octasic® Hardware Echo Cancellation Module to deliver the superior voice quality over T1, E1, and J1 in all 2 ports.

The D210 Series offers an on-board Octasic® DSP-based echo cancellation module. It supports T1, E1, and J1 environments and is selectable on a per-card or per-port basis. The Octasic® DSP-based EC module enables users to eliminate echo tails up to 128ms or 1024 taps across all 64 channels in E1 mode or 48 channels in T1/J1 modes. Further, this module takes advantage of the Octasic® Voice Quality Enhancement to provide superior sound quality on all calls.
  • About
  • Features
  • Manual

D210 Series supports industry standard telephony and data protocols, including Primary Rate ISDN (both N. American and Standard Euro) protocol families for voice, PPP, Cisco, HDLC, and Frame Relay data modes. Both line-side and trunk-side interfaces are supported.

D210 Series works with Asterisk®, Elastix®, FreeSWITCH™, PBX in a Flash, trixbox®, Yate™ and IPPBX/IVR projects as well as other Open Source and proprietary PBX, Switch, IVR, and VoIP gateway applications.



Target Applications

  • Voice-over Internet Protocol (VoIP) Services
  • Complex IVR Trees
  • "Meet-Me" Bridge Conferencing
  • Calling Card Platforms
  • VoIP Gateways (support SIP, H.323, and IAX)
  • Legacy PBX/IVR Services
  • Voice/Data Router (replace expensive routers)
  • PRI/Switch Compatibility - Network or CPE


Technical Specifications

  • Two T1/E1/J1 ports with PCI interface for high performance voice and data applications
  • RJ48 connector
  • Power: 2.3W Minimum, 3.5W Maximum at 3.3 V or 5 V.
  • Operation temperature: 0°C to 50°C
  • Dimension: 12.9cm*10.3cm*2cm


Minimum Hardware Requirement

  • 800-Mhz Pentium III
  • 128MB RAM


Certifications

  • RoHS compliant
  • Certificates: FCC, CE and LVD

Optional Octasic® DSP Echo Cancellation Module--EC100-64

  • 128ms tail/channel (on all channel densities)
  • Octasic® Music Protection
  • Adaptive Noise Reduction
  • Automatic Level Control (G.169)
  • Field upgradeable algorithm
  • V.25 / V.8 answer tone (w/ and w/o phase reversal)
  • DTMF as per Q.24
  • No CPU load as a result of echo cancellation.
  • Does not increase the physical size of the card, and no additional slot is required
  • EC100-64 power: 0.33W/3.5W
  • Storage temperature: -40°C to 75°C


PRI Switch Compatibility

  • EuroISDN (PRI or PRA) - Q.931/Q.921
  • Network or CPE
  • AT&T 4ESS
  • National ISDN 2
  • CAS Voice Modes
  • DMS 100
  • Lucent 5E


Operating Systems

  • Linux (all versions, releases and distributions from 1.0 up)


D210 Series Digital Cards
  Product Model   D210E   D210P   DE210E   DE210P
Storage temperature -65~125°C -40~75°C
Weight 54g 87g 129g 106g
EC module no
yes
Interface PCI-E PCI PCI-E PCI

Features

  • 2 T1/E1/J1 ports with PCI-Express interface for high performance voice and data applications
  • Octasic® Hardware Echo Cancellation Module Available
  • Up to 60 Simultaneous voice calls
  • 3-Month “No Questions Asked” Return Policy
  • Five Year Warranty